- QUICKSILVER 602CT (CT357) Part# 714-8M0156572
- All seals must remain unaltered
- GM 602 part# 88958602 or 19258602 (CT 350) engine
- Weight = 2,800 lbs
- These engines are sealed at the intake manifold, cylinder head, front cover, and oil pan with special twist off bolt heads or Chevrolet Performance cap seals, which are installed at the Chevrolet Performance factory
- The ONLY seals allowed for competition are:
- GM twist off bolt engines will NOT be legal in 2021
- Chevrolet Performance cap seals
- Crate USA Gen IV(Green) or Gen V(Black) cable seals, RUSH cable seals, IMCA cable seals allowed.
- NO ACAS, NDRA, FASTRAK, Crate USA Gen I (Silver), Gen II (Blue) or Gen III (Yellow) will be allowed.
- To compete with ANY other seal/sealing system contact QUICKSILVER for approval.
- These sealed engines must not be altered, modified, or changed from factory specs. The sealed engines must remain intact and not tampered with.
- Any seals that have been removed or tampered with will make the engine illegal and not eligible for competition. The penalty for anyone tampering with seals, modifying any internal engine parts, or changing the parts from stock as delivered sealed from the factory will be subject to expulsion from racing in any QUICKSILVER sanctioned event for the remainder of the season and future seasons, as determined by officials.
- No changes are allowed to the engine including the intake manifold, heads, valve covers, front cover, oil pan, harmonic balancer, or any other part(s) on or in the engine.
- No vacuum pumps. No evac systems of any type, including but not limited to the breather system style.
- Engine’s Chevrolet Performance serial number, and when applicable, QUICKSILVER build certification number, must be clearly visible to series technical inspectors.
- Driver’s finishing in the top 5 may claim/purchase the engine of any car finishing ahead of them. Claim fee is $3,800. Engine claimed will be just as it comes from Chevrolet Performance and WILL NOT include any accessories, carburetor, water or fuel pump, wires, distributor, etc. Refusal of claim will result in immediate disqualification and penalized the same as an engine that was found illegal inside the seal system (infraction penalty #1 below).
Engine Option #2 Infraction Penalties
- Any violation of the engine rules and/or factory specs inside the sealing system of the engine will result in the driver and/or owner being disqualified from that event and suspended from series competition for 365 days and pay a $1,000 fine. After that period, the driver can only compete in series events with an engine equipped with original factory GM seal bolts, CP cap seals, or QUICKSILVER seals from an authorized rebuilder approved and authorized by QUICKSILVER officials. Driver and/or owner will be notified in writing of series’ decision, via certified mail. All official’s decisions are final.
- Any violation of the engine rules and/or factory specs outside the sealing system of the engine will result in the driver being disqualified from that event. Driver and/or owner may be suspended from series competition for up to but not more than 30 days and fined up to but not more than $500 at series’ officials’ discretion. Driver and/or owner will be notified in writing of series decision. All decisions are final.
ENGINE CLAIM PROCEDURE
- Competitor, either driver or car owner, finishing in the top five of the feature race, must hand a track official GM 602 Claim will be cost of new engine at time of claim. Within five (5) minutes after the checkered flag falls on the feature race.
- Engine will be removed, confiscated, and inspected by officials at an agreed upon time and place upon being claimed. If legal, competitor claiming engine will receive the engine and will have to have engine re-sealed by a certified rebuilder of their choice. Series will provide seals for re-sealing. If engine is found to be illegal, driver being claimed will be penalized as outlined in infraction penalty #1 below and claiming driver will receive refund of their claim money.
- Protest fee for a complete tear down on an engine that finishes the feature event is $1,000. Complete tear down is the only option available. The protest fee must be paid to the race director or technical director, in cash, within 10 minutes after the checkered flag has fallen on the feature. Must finish in the top 5 to be eligible to protest. $100 of protest fee will go to the track. $200 will go to the series. Remainder of the protest money ($700) will go to the winner of protest. ANY PART OR PARTS FOUND TO BE ILLEGAL WILL BE CONFISCATED!
- Any time an engine is protested, and driver/car owner accepts the protest and agrees to tear down, the engine being protested, along with the carburetor, must be removed and impounded by racetrack immediately. Arrangements for Technical Director to inspect engine will be made, and parties involved will be made aware of time and location of inspection that is suitable to all. Any refusal for removal, impound, or inspection will result in disqualification.
- There will be NO counter/reverse protesting or claims allowed (cannot protest car finishing behind you).
- Only two (2) people from the car being protested, and the driver filing the protest will be allowed in the determined tech area during any tear down. Driver initiating the protest must be present unless extreme circumstance and arrangement is made with officials. All official’s decisions are final.
- Failure and/or refusal to tear down any engine or refusal to allow your car to be inspected by series officials at any time will result in a 365-day suspension and a fine in an amount to be determined by series officials.
ENGINE SETBACK RULE
- Engine must be mounted in stock location, in center of chassis. #1 spark plug must be in front of or centerline of upper ball joint.
- Weight penalty of 50 lb. per ½” will be added forward of water pump for improper setback.
- 4 Barrel carburetor will be checked with go-no-go gauges top to bottom.
- Either engine Option may run 1” maximum carburetor spacer, .040” tolerance. At no point may spacer extend into intake manifold area. Two (2) standard thickness carburetor gaskets, .070” maximum thickness allowed.
- One (1) four-barrel carburetor only with a quality 650 CFM carburetor.
- Any standard distributor types of electronic ignition allowed. Any ignition box allowed.
- No magnetos and No crank triggers.
- No electronic traction control devices allowed. Drivers finishing in the top 5 may protest another top 5 finishers box for $600 claim on box, $500 to person protested, $100 to the series’, failure to refuse protest will result in disqualification, will lose winnings and 2 race series suspension.
- All cars must have a starter in working order. Starter must be mounted in stock location. Reverse mount starters OK
WATER PUMP RULES
- Stock type cast or aluminum water pump permitted.
- No electric water pumps.
- Manual fans only. No electric fans.
- Collector type headers required. Must have four (4) tube into one (1) collector.
- Mufflers not required UNLESS track mandates them. If mandated, mufflers must have some type of internal noise dampening characteristics i.e., baffles, extruded holes, screen, chambered, etc. Mufflers must meet local speedway’s noise decibel requirements.
- No tri-y headers or merged headers allowed.
- No square tube headers.
FUEL, FUEL CELL AND FUEL PUMP RULES
- An approved fuel cell must be securely mounted in the trunk area of the car, inside a .20-gauge metal box supported by a minimum of 2” x 1/8” steel straps.
- Gasoline, racing gas, or E-85 fuel allowed. No methanol or alcohol.
- None of the following chemicals are allowed in any fuel used for competition:
- Nitrous oxide
- Propylene oxide
- Ethyl hexanol
- Gasoline or Race Gas – specific gravity NOT to exceed .744 at 60 degrees. Any gasoline or race gas with a specific gravity of .745 or greater will be disqualified. Fuel is subject to testing on site, or fuel samples may be taken and sent to an independent lab for testing.
- E-85 – specific gravity not to exceed .7855 at 60 degrees. Any E-85 with a specific gravity of .7856 or greater will be disqualified. Fuel is subject to testing on site, or fuel samples may be taken and sent to an independent lab for testing.
- It is the competitor’s responsibility to know what is being put into their fuel cell.
- Drivers finishing in the top 5 may protest the fuel of car or cars finishing ahead of them. Protest fee is $150. Driver filing protest must have money with them and notify track or series official within 5 minutes of the checkered flag in that event. Fuel sample(s) will be taken and sent to an independent lab chosen by the series for testing. All official’s decisions and lab results are final and official.
- Mechanical fuel pump only. Must be mounted in stock location
PENALTIES FOR ANY ILLEGAL FUEL ARE AS FOLLOWS:
- First Offense – Loss of winnings and 2 race suspensions
- Second Offense – $1,000 fine and 90 day suspension
- Third Offense – $2,000 fine and 365 day suspension
ALL OFFICIAL’S DECISIONS ARE FINAL AND AN INDEPENDENT LAB WILL BE USED AT TRACKS DISCRETION
- Cross Breeding Bodies and Engines: engine manufacturer and body manufacturer may be cross bred (i.e., Chevrolet engine in Ford Chassis and Body, or Dodge or Ford on Chevy chassis and engine).
- ALL cars must have stock appearing roof. NO flat, late model or open wheel modified style roofs allowed. All roofs must have roof supports both front and rear and should be stock or made just like stock. Cars may NOT run topless.
- May use aftermarket body panels. Steel or aluminum hoods, fenders, doors, quarter panels (fenders and quarter panels may be made of composite material), and trunk lids. NO fiberglass side body panels anywhere.
- ALL bodies must be stock style. No raised quarter panels.
- Deck Height: 40” maximum, no tolerance (Body Diagram K). Deck height must be measured from bottom of spoiler to the ground. May be measured at ANY time.
- Deck Width: 64” maximum.
- No station wagon, SUV, or hatchback style bodies.
- Body must not be any wider (from side to side) than 68”, measured at driver’s compartment (see body diagram F).
- Rear of car must not exceed 64” wide, measured at top of rear deck (see body diagram G).
- Both sides of the body must taper the same on each side. No single side taper or “late model” type body taper.
- Car must have minimum 18” tall, 4” wide numbers on both sides and roof. 6” tall numbers recommended for front and rear of car.
- All cars must have minimum .080” aluminum cockpit that fully encloses driver compartment. All cars must have front and rear driveshaft loop installed.
- Body must be centered on chassis and be stock appearing in all ways.
- Aftermarket plastic nose pieces mandatory. Front of car must be enclosed. NO FLOPPERS OR FENDER SKIRTS ON FRONT END LIKE A LATE MODEL. ALL FENDER ENCLOSURES MUST REMAIN TIGHT WITH BODY LINES AND BE RIVETED TO FENDERS, TUCKED IN TIGHT WITH BODY LINES. Nose pieces should be mounted high and tight like a streetcar. NO wedge or late model style nose pieces allowed. ALL FINDER ENCLOSERS ARE AT THE DISCRETION OF QUICKSILVER TECHS.
- The tail of car can be open and aluminum tail pieces are allowed.
- Body must be minimum height of 5” off the ground at all points around car. (Body Diagram B)
- Maximum distance of 45” from furthest point on front of nose to front cross member (Measured from where lower control arm bolt goes through crossmember to farthest point of nose). (Body Diagram C)
- Rear Quarter Panels – 48” maximum measured from center of axle straight line to rear of car (Body Diagram D) and 51” maximum measured from center of axle to top of quarter panel/bottom of spoiler (Body Diagram E).
- Gradual nose rake – 3” maximum (Body Diagram H).
- All glass and plastics must be removed.
- For safety purposes, all cars must have minimum of 13” wide window opening on both left and right side in case of emergency exit (Body Diagram J).
- Driver cockpit rock shield cannot extend any farther to the rear than the steering wheel.
- 8” maximum spoiler with 8” side boards (see spoiler diagram for specs).
- 60” maximum width of rear spoiler (Body Diagram I). Spoiler must be centered on body, and same angle across entire span of rear of car.
- Bottom of rear spoiler supports must be flush with the rear of the car. Spoiler supports cannot hang or extend off the rear of the car.
FRAME AND SUSPENSION RULES
- 108” minimum wheelbase. Any chassis with wheelbase shorter than 108” will not be allowed.
- Uni-body cars may connect sub frames. X-bracing allowed. All cars must remain within ½” of stock wheelbase of car being raced. Wheelbase must match that of front clip being raced, and rear suspension must match front suspension (ex. 70s Camaro front clip must have leaf spring rear suspension). LEAF CARS ARE ALLOWED SLIDERS
- QUICKSILVER X, Y, G Tubular Metric Frame allowed. LE JOHNSON FRAMES.
- Any QUICKSILVER Street Stock Tubular Frame or Repair Clip needs to be cleared through Quicksilver before racing.
- Must use stock type steering box, stock drag link, idle arm. Tie rods and ends may be tubular and made heim jointed. Quick Steer allowed.
- Any stock type spindles allowed (recommend Speedway or equivalent 3-piece spindles for ease of repair). No wide 5 spindles or safety hubs.
- Stock production lower control arms, of any manufacture mandatory. Metric cars may use tubular lower control QUICKSILVER approved WMP Products Part #1010 or 1110 (Metric/Monte Carlo right side); #1011 or 1111 (Metric/Monte Carlo left side); and #1210 (Camaro/Chevelle right side) and #1211 (Camaro/Chevelle left side).
- No shortening or lengthening lower control arms.
- 5” or 5 ½” coil springs mandatory, mounted in stock location.
- Weight jacks allowed.
- Tubular aftermarket upper control arms allowed.
- Cross member may not be cut or altered except for fuel pump or oil pan clearance.
- Bump stops or bump springs of any type allowed. One spring rubber per corner maximum (clarification 12/01/2021 QUICKSILVER Technician has the rite to deem not legal as seen needed.
- Stock type rear suspension only. Must be the same as make of car being raced.
- Stock rear frames may be repaired from center of rear end housing to rear bumper with square tubing or 1 ¾”, .095 minimum thickness round tubing.
- Any stock type rear end housing permitted (GM 10-12 bolts or Ford 9 inch) in any make of car. May be locked.
- Quick-change rear ends are allowed. Standard Weight no light weight
- Floater axles permitted.
- Must use steel, stock lug pattern hubs. No wide 5 aluminum safety hubs.
- Rear trailing arm mounts at frame or leaf spring mounts, must remain unaltered and in stock. Leaf spring cars may have adjustable shackles on rear only. Rear trailing arms must be stock (may be boxed for strength and safety), or stock length tubular, non-adjustable trailing arms are ok. Arms must be within ½” of factory length trailing arms for car being raced, 2 ¾” maximum from bottom or rear end housing to center of control arm bolt.
- Upper control mounts maximum of 3” from center of top of rear end housing to center of mounting bolts or on 9” Ford housing, 7 ¾” from seam center of axle tube to center of mounting bolts.
- No sliders front or rear.
- 5” coil spring mandatory. Any leaf springs allowed.
- Springs must be mounted on top of and centered on axle tube.
- Weight jacks allowed.
- No panhard bars or z bars of any type.
- Stock Metric frames have the option to be repaired with QUICKSILVER Street Stock tubular rear or front clip (Available for purchase by any competitor by contacting QUICKSILVER Street Stock office) in the event of a crash and needing repair. All QUICKSILVER tubular rear and front clips will be serial/VIN numbered and titled through QUICKSILVER Street Stock. Any tubular rear or front clip found to not have the QUICKSILVER Street Stock serial/VIN number will be considered illegal.
- Any Crate QUICKSILVER Street Stock Tubular Repair Clip found to be altered, could result in severe fines and penalties for the racer. The serial/VIN and titling process has been implemented to track/trace these from the manufacturer to assist in keeping the program sound and in place.
- Bump stops or bump springs of any type allowed. One spring rubber per corner maximum (clarification 11/10/2021).
- Must have operating brakes.
- Dual master cylinders ok.
- Standard steel rotors only.
- No scalloped or gun drilled rotors.
- Any brake caliper Ok. Brake calipers must be mounted in fixed position. NO brake floaters.
- No data acquisition devices of any type allowed.
- Steel bodied, symmetric (same size/diameter), non-adjustable shocks only. No Schrader valve shocks. No piercing valves. Shock valving or gas pressure may not be adjustable at the racetrack. No air shocks.
- $200 per shock
- Car claiming shock(s) must finish in the top 5 and on the lead lap. Claims must be made to Tech Official within 5 minutes after the checkered flag falls on the feature event.
- No reverse shock claims (cannot claim shocks from car finishing behind you)
- Refusal to allow shocks to be claimed or confiscated by officials will result in driver losing all points and money for that event, and face the following punishment:
- First Offense – 2-week suspension and a loss of winnings
- Second Offense – 30-day suspension and $500 fine
- Third Offense – 365-day suspension and $1,000 fine
- Series or track officials may confiscate or claim shocks at any time. If confiscated and shocks are determined to be legal, they will be returned to driver and points and money will be awarded as earned. If shocks are determined to be illegal, driver will lose all points and money from the event and face the following punishment:
- First Offense – 2-week suspension and $250 fine
- Second Offense – 30-day suspension and $500 fine
- Third Offense – 365-day suspension and $1,000 fine
CLUTCH AND TRANSMISSION RULE
- Bert or Brinn transmission allowed. NO ball spline Bert or Brinn allowed, Carbon Fiber drive shaft is ok.
- Drive shaft loop MANDATORY on all cars. Must be mounted 5” to 8” behind front u-joint of drive shaft.
- ALL drive shafts must be painted white for safety.
TIRE AND WHEEL RULES
- 8” maximum steel wheels. Beadlocks allowed. Stock type lug pattern only
- No wide 5 wheels or adapters
- Wheel covers must be securely fastened. Recommend that wheel covers have a minimum of 5 mounting points. Wheel covers having only 3 attachment points must be bolted on at all 3 points using a minimum 1/4” or 5/16” magnetic steel hex head bolt and fastening (nut assembly) system. Cars that lose a wheel cover may be subject to disqualification
- Hoosier H500 tires ONLY
- Grooving or siping are allowed. Grinding/buffing is permitted. No needling. NO drilling.
- Tires must remain in factory manufactured condition. Any alteration from factory manufactured condition is prohibited. All decisions are final
- No chemically altering of tires
- Tires must punch 55 at ambient temperature (cold). The series’ durometer is the official durometer and testing method of punch number rule. Any tire failing to punch properly will be subject to further test methods and disqualification. Tire(s) in question may be confiscated and tested by any means deemed necessary by track or series’ officials. ALL DECISIONS ARE FINAL
- Drivers finishing in the top 5 may protest the tire of car or cars finishing ahead of them. Protest fee is $150. Driver filing protest must have money with them and notify track or series official within 5 minutes of the checkered flag in that event. Tire samples will be taken and sent to an independent lab chosen by the series for testing. All official’s decisions and lab results are final and official.
PENALTIES FOR ILLEGAL TIRES
- First Offense – $500 fine and 30-day suspension
- Second Offense – $1,000 fine and 90-day suspension
- Third Offense – $2,000 fine and 365-day suspension
- Failure to allow any tire(s) to be confiscated will result in an additional $500 per tire fine added to any other fines and penalties. All decisions are final and a 365-day suspension.
FINES, PENALTIES AND SUSPENSIONS
- Pre-Race Technical Violation(s): Any technical violation(s) discovered during pre-race technical inspection, the driver will be notified of violation(s), and car must be fully in compliance before allowed to compete.
- Legality of Part(s): Any question concerning legality of part(s) by QUICKSILVER Street Stock or track technical inspector, the part(s) in question will be confiscated and sent to Chevrolet Performance for further inspection. The finish for this race will be held until legality of part is determined. Points, monies, and finish will be adjusted in the event of a disqualification. Any parts deemed illegal will be confiscated. Failure to allow confiscation of any part will be penalized the same as an inside the sealing system engine infraction and penalized accordingly (see Engine Option #1 Penalty #1).
- By entering and/or competing in any event, drivers, car owners, and team members waive any right to file an appeal. All official’s decisions are final.
- All decisions of series officials and/or the promoter regarding the application or interpretation of the rules, and the scoring of finishing positions shall be non-litigable. All participants agree that they will not initiate any legal action against QUICKSILVER Street Stock, LLC, the promoter, or officials to challenge any decision, to seek monetary damages, to seek injunctive relief, or to seek any kind of legal remedy. Any such legal action pursued by a participant which violates this provision, the participant (driver) and/or owner expressly agrees to reimburse QUICKSILVER Street Stock and/or Mercury Marine for all its attorney fees and costs in defending against such legal action.
- By signing the annual membership/registration agreement, participants agree that they will comply with the written rules and procedures of v. If the participant breaches this membership/registration agreement, he or she will be liable for actual and liquidated damages sustained by QUICKSILVER Street Stock and/or Mercury Marine.
CODE OF CONDUCT AND CONDUCT PENALTIES
- Drivers, car owners, and teams are to always conduct themselves in an orderly and professional manner while competing at any event. Series director will judge incidents of conduct accordingly and use the following criteria to assess any penalties upon a driver, car owner, or race team as necessary.
- Driver will be notified of penalties that have been levied by the series director. All series director’s decisions are final.
- Series director may choose to levy monetary fines, suspension from sanctioned events, and deduct points as deemed necessary by the rules infraction or actions taken by a driver at any time. Series and tracks reserve the right to enforce or levy fines, points penalties, require changes, or suspension from competition for any actions deemed detrimental to the sport, series, or track. This includes, but is not limited to, social media posts, and/or derogatory or distasteful statements/slogans/photos/graphics on cars or any other driver related material visible to the public (i.e., helmets or driver’s suits, trailer, or transporter, etc.).
- Series will adhere to, and uphold any suspension levied on a driver by a specific track. If a driver has been suspended or barred from entering the property, that will be upheld by the series. Series and sanctioned event do not overrule a track’s decision to refuse entry to any driver, car owner, or crew member.
- NOTE: These rules are not intended to eliminate competition or accidental contact. However, they are intended and may be used to penalize deliberate contact and/or over-driving or deemed deliberate acts of aggression towards other drivers.
- No driver will be allowed to compete/participate while under the influence of any alcoholic beverage or illegal/controlled substances. If a driver is found to be participating in such a manner, that driver will be immediately suspended and removed from competing.
- Any competitor that verbally abuses a series or track official by using profane and/or disrespectful language is subject to a fine of $100 for the first offense. A $300 fine, one-race suspension, and loss of points for the second offense. After a second offense, driver is subject to 30-day or longer suspension and loss of points as determined by officials.
- Any physical confrontation, either on the track or in the pit area, will result in the aggressor(s) being suspended for one race, loss of points, and $300 fine for the first offense. A second offense will result in the driver being suspended for the remainder of the seasons, and a $500 fine.
- Any driver who enters another driver’s pit area, or approaches another driver’s car on the speedway, will be deemed the aggressor. Away from either driver’s pit area, both drivers will be considered aggressors. Drivers should be aware that they are responsible for any member of their race team, and the above penalties will apply to the driver concerned even if the driver is not directly involved.
- In the event of a felony conviction of a driver, team member, or team sponsor, disciplinary action could be a minimum of a 365-day ban from the series beginning with the date of the conviction or the date of the completion of any incarceration to said conviction, whichever date shall last occur.
- Disciplinary action may also include, but is not limited to, the right of the series organizers and officials to suspend either temporarily, or permanently, any driver, team member or sponsor, whose actions, in the sole opinion and discretion of the series organizers and officials, may have resulted in, or may result in harm or detriment to QUICKSILVER Street Stock.
- Any incidents occurring during the last five events of the season, may result in penalties being applied to the beginning of the following season.
- Any incident(s) that are judged to be deliberate acts of aggression, whether on or off the track, under green or caution, will result in disqualification and a monetary fine to be determined by series’ officials.
- Series officials reserve the right to increase the above penalties, by either adding additional money, suspension time, or points loss, depending on the severity of the incident.
- Series officials reserve the right to revoke a competitor’s membership at any time. All official’s decisions are final.
- Any threat of, or legal action taken or levied against the series by a driver/race team, will immediately result in that driver’s indefinite suspension from competition in any/all events.
- Any disqualification, other than a weight violation, will result in no points and no money for the event. Weight violation will move the driver to the end of the finish order.
- The decisions made, and disciplinary actions taken by the series and officials hereunder shall not be appealed by the driver, team member, or team sponsor affected thereby.
- ALL OFFICIAL’S DECISIONS ARE FINAL
ATTENTION CAR OWNERS AND DRIVERS
Please remember that we are here and can race because of the fans, promoters, and sponsors. If they don’t benefit, we won’t benefit. While we understand that this competition involves substantial financial stakes, there is no excuse for bad or unruly behavior which would tend to bring the series, tracks, or sponsors into disrepute.PLEASE NOTE: By entering, qualifying, and/or competing in an event, you are accepting these rules and regulations as being those under which you are prepared to race. Any driver entering and competing in an event acknowledges and accepts the following: PIR and its assigns may use the drivers names, pictures, likeness, and performance in any way, medium, or material, including without limitation by and through, television, radio, air wave: cable and satellite broadcasts, film productions, videotape reproductions, audiotape reproductions, transmissions over the internet, and public and private on-line services authorized by the PIR and the like, before, during, and after the event, for promoting, advertising, recording or reporting in the event or any other event, and do hereby relinquish all rights there to for these purposes, provided however, that the car owner and driver shall retain the exclusive use of its or his/her name, picture and likeness in connection with product endorsements and the sale of products, services, concessions, and merchandise.